When one is looking to reduce the reverberation of a room by the means of absorbent material, ITS offers a wide range of reverberation control systems for industrial working premises / buildings for many applications of soundprrofing / acoustic insulation related to the protection of workers against noise.
ITS offers powerful solutions at a reasonable cost in response to all the needs in the matter of soundproofing (preventive or curative) by the means of ergonomic equipment (standard or tailor made) for which the quality of design and of execution meets the highest level of requirement in this area for an efficient fight against noise in the context of compliance with legislation on noise at work (or of improvement of working conditions).
The reverberation control systems for industrial working premises / buidlings offered by ITS allow to reduce the noise amplification due to reverberation phenomena and to limit its propagation in interior considered spaces (and therefore toward adjacents spaces, indoor or outdoor).
In case of working premises where the implementation of one of the reverberation control systems for industrial working premises / buildings proposed by ITS has been performed:
- the decrease of sound levels per doubling distance with respect to a noise generator (sound spatial decay) in the considered spaces is always complying to the values required by the regulations
- the noise level in the considered spaces is generally well below the lower values of exposure of workers to noise trigging action, offering in any cases to occupants (including: operators of very noisy machinery) the auditory comfort necessary for the performance of their tasks
For all the types of premises where the implementation of one of the reverberation control systems for industrial working premises / buildings proposed by ITS has been performed:
- the reverberation time (sound temporal decay) is always complying to the values used for the rating of the premise (depending to its volume) in the class "regular premise" or "damped premise" or even "dead premise" (for which the mplification of noise levels is limited unlike a "semi-reverberant premise" or a "reverberant premise")
The reverberation control systems for industrial working premises / buildings offered by ITS are usually:
- either made of absorbing panels for walls: metallic with coating with a filling made of mineral fiber or of polyester wool or of acoustic foam M1
- or of suspended ceiling tiles: metallic with coating with a filling made of mineral fiber or of polyester wool or of acoustic foam M1
- or of suspended baffles made of mineral fiber or of polyester wool or of acoustic foam M1
Some of those construction elements may have a sound absorption coefficient of 100 % in the medium and high frequencies (where is located the maximum sensitivity of human hearing) as a standard (a higher performance can be obtained by the means of special constructions).
Regarding products and construction systems proposed by ITS their performance is measured in laboratory according to current standards:
- their sound absorption coefficient according to the standards NF EN ISO 354 Acoustics - Measurement of sound absorption in a reverberation room and NF EN ISO 11654 Sound absorbers for use in buildings - Rating of sound absorption
The reverberation control systems for industrial working premises / buildings proposed by ITS can be delivered as a kit ready to assemble with assembly instructions or be installed turnkey.
A guarantee of acoustic performance on site is issued for each installation of reverberation control systems for industrial working premises / buildings.
|
reverberation control system |
reverberation control system |
The reverberation control systems for industrial working premises / buildings offered by ITS are robust constructions with quality finishes ensuring a high durability and sometimes also contributing to the improvement of the visual ambiance of some places: a particular care is taken - by the means of the choice of materials, aspect and colors - to the architectural integration of soundproofing equipment that are often a key factor of success for the interior design as well. |
 |
Acoustic panel for walls of industrial working premises |
|
Suspended baffle for industrial working premises soundproofing |
|
Suspended ceiling for industrial working premises |
 |
Sorry, no dedicated brochure downloadable presently (however: available equipment) |
|
See the frequently asked questions related to this equipment |
ITS offers reverberation control systems for industrial working premises, buildings for the acoustical comfort and for noise limitation.
Reverberation diminution device for workshops / production halls, reverberation diminution device for industrial working premises / buildings, reverberation limitation device for workshops / production halls , reverberation limitation device for industrial working premises / buildings, reverberation reduction device for workshops / production halls , reverberation reduction device for industrial working premises / buildings, reverberation control system for workshops / production halls, reverberation control system for industrial working premises / buildings, soundproofing system for workshops / production halls, soundproofing system for industrial working premises / buildings: all equipment that one can source thanks to Isolation Technologie Services (ITS).