When one sets the objective of the diminution of noise in a swimming pool, a gymnasium or other sports halls and when one wishes to achieve it through the use of absorbing materials allowing to limit reverberation, ITS offers a wide choice of solutions for many applications related to soundproofing.

ITS offers quality products and services at a reasonable cost in response to all needs (new or renovation) in relation to compliance with specifications relating to acoustic comfort, e.g. based (in France) on the standard NF P 90-207 Sports halls - Acoustics or on other documents inspired by it, or (elsewhere) on other locally applicable documents (e.g. in Germany the standard DIN 18041).

The reverberation and noise diminution devices for swimming pools, gymnasiums and other sports halls marketed by ITS make it possible to reduce the amplification of noise due to the reverberation phenomenon and to limit its propagation in the considered interior spaces (and, also - even if not always a particular attention is paid to that, towards the adjacent spaces, interior or exterior).

In the case of swimming pools, gymnasiums and other sports halls for which the implementation of one of the reverberation and noise diminution devices offered by ITS has been carried out:

  • the reverberation time always conforms to specified values
  • the decrease in sound level by doubling the distance to a sound source (spatial sound decrease) always conforms to the specified values
  • the ambient sound level is significantly reduced: a reduction in the sound pressure level of 5 dBA or more can be obtained in many common applications, offering in all cases to the occupants the necessary hearing comfort

The reverberation and noise diminution devices for swimming pools, gymnasiums and other sports halls marketed by ITS generally consist of:

  • either wall-mounted acoustic insulation panels: painted metal (or wood), often: perforated (holes being circular, square or in the form of slots) with lining in mineral fiber or polyester wool or M1 acoustic foam
  • either suspended acoustic ceiling tiles: painted metal (or wood) with mineral fiber or polyester wool filling or M1 acoustic foam
  • either suspended baffles (or other elements) in mineral fiber or polyester wool or M1 acoustic foam

Some of these constructive products and systems can have an absorption coefficient of more than 90% at mid and high frequencies (where the maximum of human hearing sensitivity is located) as standard (higher performances can be obtained at using special constructions).

With regard to the constructive products and systems offered by ITS, their performance is measured in the laboratory according to the standards in force:

  • their sound absorption coefficient according to NF EN ISO 354 Acoustics standards - measurement of sound absorption in a reverberation room and NF EN ISO 11654 Acoustics - Sound absorbers for use in buildings. Rating of sound absorption

The reverberation and noise diminution devices for swimming pools, gymnasiums and other sports halls offered by ITS can be delivered in the form of a ready-to-assemble kit with assembly instructions or else be installed turnkey.

An in-situ acoustic performance guarantee is issued for all installations of reverberation and noise diminution devices for swimming pools, gymnasiums and other sports halls.

wall sound absorbing lining in a sports hall (swimming pool)

 

 

   

The reverberation and noise diminution devices for swimming pools, gymnasiums and other sports halls marketed by ITS are of high durability; they adapt to all architectural designs and thus contribute, far beyond acoustics, to obtaining a quality environment for users and employees.

Go to other pages of this website presenting the sub sets constituting this equipment
Absorbing panel for walls of tertiary premises
Absorbing screen for tertiary premises
Acoustic foam
Polyester wool for soundproofing
Suspended baffle for tertiary premises
Suspended ceiling tile for reverberation control of tertiary premises
 Download a brochure related to this equipment

Sorry, no dedicated brochure downloadable presently (however: available equipment)

See the frequently asked questions related to this equipment
See the frequently asked questions related to this equipment
end faq

ITS markets reverberation and noise diminution device for swimming pools, gymnasiums and other sports halls

They are specially designed to meet the specific needs of such spaces:

  • sound absorption coefficient adapted to the frequencies corresponding to speech and screams
  • mechanical protection of wall coverings (including against projectile impact e.g. balls, balloons)
  • anti-corrosion properties in a humid environment

The products used are selected for their acoustic, but also decorative qualities (wide choice of materials and colors possible).

Reverberation and noise diminution device for swimming pools, gymnasiums and other sports halls, reverberation and noise limitation device for swimming pools, gymnasiums and other sports halls, reverberation and noise reduction device for swimming pools, acoustical improvement device for swimming pools, gymnasiums and other sports halls, soundproofing device for swimming pools, gymnasiums and other sports halls: all equipment that one can source thanks to Isolation Technologie Services (ITS).